Swiss Plus Logo

SCJ-8140 Citrus Juicer: Choosing the Cone and Using the Lever

Choose a cone by the size of the cut fruit, center it under the press lever and manage the flow with the SCJ-8140 anti-drip spout.

  • November 8, 2026
  • Reading time: 2 min
  • Mixers

A small lemon and a large orange are unlikely to sit equally well on the same cone. The Swiss Plus SCJ-8140 citrus juicer has two cone sizes, a metal lever, a stainless steel filter and an anti-drip outlet. Match the cone to the cut fruit and position your glass before pressing.

Choose the cone by the size of the cut fruit

Cut the fruit in half across its middle. Try the smaller cone for a narrow half such as a small lemon, and start with the larger cone for a wide orange half. If the fruit rocks or the lever does not line up with the center, stop the appliance before checking its position or cone size again.

What to check at each step

Situation

Where to start

What to check

Small, narrow half

Small cone

The cut face sits at the center

Large, wide half

Large cone

The fruit stays steady and the lever moves freely

Fruit slips or tilts

Stop and reposition

Cone fit and a flat cut face

Changing glasses

Close the anti-drip outlet

The flow has slowed and the next glass is ready

Press gently and straight down

Place the fruit half cut side down at the center of the cone. Lower the lever gently along its natural travel. If the fruit tilts, release the pressure and wait for the appliance to stop before repositioning it. Unplug the juicer before changing cones or removing parts.

SCJ-8140 citrus juicer with the lever raised, showing the press head and juice outlet

The raised lever, press head and juice outlet in the official SCJ-8140 product photograph.

Use the anti-drip spout when changing glasses

Set a stable glass under the spout before pressing and open the outlet. When swapping glasses, let the flow slow and close the spout as directed for this model. Reopen it after the second glass is in place.

Clean the filter and removable parts after use

Unplug the appliance. Wash only the removable parts identified as washable in the instructions and dry them before reassembly. Follow the model’s cleaning directions to remove pulp from the filter, and keep the motor housing out of water.

When a citrus press fits your routine

If you mostly press halved lemons and oranges, the lever and two cone sizes suit that task. If you also want to juice other produce, compare how the different appliances work in the juicer buying guide and Swiss Plus juicer category.

Frequently asked questions

Start with the smaller cone for a small lemon and the larger cone for a large orange. The cut face should sit steadily on the cone and the lever should lower easily.

With the appliance stopped, check the cut face, the position of the fruit and the cone size. A gentle, straight press helps the fruit half stay in place.

Wait for the flow to slow, then close the anti-drip spout as directed for this model. Place the next glass under the outlet before opening it again.

Need guidance?

Swiss Plus after-sales experts are here to help.

Contact support